My MK6 SWB lo roof Seat and window pics added

[AndyG]

8K
But the fogs need doing now
Do they make them for those too

[madmark]

i think you would have to have another set of ballasts for the fogs thats why i havnt botherd!

[100 T280]

You'd have to be carefull doing the fogs, the foglamp multiplugs would need cutting off and wiring direct to the ballasts, ballasts need mounting up high enough to prevent water damage, and as for getting the wiring into the lamp housings, with them being very exposed to road spray...
You'd only need an H7 kit though, cheaper than an H4.

[madmark]

i thourt i would leave mine alone as i dont want to start chopping wires about

[MrMPuk]

You'd only need an H7 kit though, cheaper than an H4.

Are the fogs not H3?

[100 T280]

Are the fogs not H3?

Yes, I think you're right. .......

[MrMPuk]

Are the fogs not H3?

Yes, I think you're right. .......

I wasn't sure, I just know they aren't H1 as listed on all the bulb websites.

[Guy88]

Got all me timing chain bits now £250 lighter

[Guy88]

Done the tentioner

10 am this morning


bumper off


grille off



Rad out



cover off



offending item



new bits in



new cover on and crank seal fitted




bumber and grill back on and im driving it by 1pm

[madmark]

well done mate!

[nitroman]

top work....good helpful pics too!
good van that

[Luke]

you make it look easy i must admit the mk6 front design is it best for access you can get

[Guy88]

definatly curd the rattle on start up

i could physically feel the spring in the tentioner was weak, one thing i did notice is theres no gasket between the tentioner and block

[Guy88]

you make it look easy i must admit the mk6 front design is it best for access you can get

Luke it is easy

Its easier than doing a belt on a Di

[spudmab]

well done that,

the front end coming of makes it easy,

would like to convert my mk5 to do the same,