As you all know, the outriggers at the front of the rear spring are different when the van is fitted with a side loading door, the part we will deal with first is identified in
GREEN below;
Here are some pictures of the part, this part suits the left hand side of the van when fitted with a side loading door on that side, available from stock for just £45 plus postage, produced from 1.5mm Zintec and fitted with the two internal stiffeners. A 'mirror' image part is available for vans fitted with a side loading door on the right hand side.
Here are some picture of this part being fitted to a customer's van in our workshop;
In this picture you can see we have bent the end of the main hanger mounting down to enable this part to be fitted, no need to cut a chunk of the floor out!
Another view of the part clamped in place;
The lower 'C' post panel that fits into the end of the outrigger needed replacement, here you see the replacement part clamped in place;
This part is available for just £25 and suits the left hand side when the van is fitted with a side loading door on that side, available from stock. The 'mirror' image for vans with a side loading door on the right hand side is available to order.
Here are some more picture of the parts in place on the van;
These two pictures show the 'join' that needs to be welded after installation, this allows the outrigger to be fitted 'over' the lower 'C' post;
With a pit of protective paint the repair can be made to look 'factory'
If you are interested in these or any other parts we produce, or advice and assistance on body repairs for your vehicle then please use the hyperlink below and drop us a line.