Both interior lights in my MK7 have stopped working.
The dash display still reads when a door is open, have checked the bulbs and all the fuses in the fuse box behind the glove box.
Any other ideas?
Knobby2515 wrote:Both interior lights in my MK7 have stopped working.
The dash display still reads when a door is open, have checked the bulbs and all the fuses in the fuse box behind the glove box.
Any other ideas?
72?knobby1 wrote:Knobby2515 wrote:Both interior lights in my MK7 have stopped working.
The dash display still reads when a door is open, have checked the bulbs and all the fuses in the fuse box behind the glove box.
Any other ideas?
Fuse #72 in the BCM...have you chacked that one..??
Lord Knobrot
Knobby2515 wrote:72?knobby1 wrote:Fuse #72 in the BCM...have you chacked that one..??
Lord Knobrot
I will check the manual and find/check it.
Knobby2515 wrote:Update,
I found the fuse board in question and started pulling fuses to see what had blown.
72 as mentioned had blown, so I replaced it.
As I did so I heard a click and the interior lamps came on.
So I tried the lamps a few times then locked and unlocked on the key, all good.
The next day I got in the van but no lamps working, so I guess it had blown again.
Everything else works on the van.
It says in the hand book "battery saver supply, OBD11 (KL30)"
Whats that mean?
Return to Mk6 & Mk7 - Third Generation Transits
Users browsing this forum: pesa7122
This site contains affiliate links for which we may be compensated.